The Model HTS-200 Head and Tailstock Positioner is a quality Head and
Tailstock designed to support and rotate 20,000 pounds. The frames are rigid box section,
all welded construction. Additional rigidity is accomplished by utilizing oversize antifriction bearings and by having a welded connection between table and kingpin. The table
is driven by an A.C. Brakemotor, through roller chain and sprockets to a high efficiency
worm reducer and a final spur gear stage. Control voltage is 24 VAC. Equipment is high
frequency protected.
Supporting Capacity ...........................20,000 pounds total, 10,000 pounds each end at 12" maximum overhang from face of table.
Rotation Torque (Rt)...........................120,000 inch pounds.
Rotation Motor....................................3 H.P. A.C. Brakemotor.
Rotation Speed...................................1.00 RPM constant speed.
Net Weight .........................................Headstock 3,100 lbs, Tailstock 1,700 lbs.
Electricals...........................................230 volt, 15 amps/460 volt, 10 amps, three phase, 60 cycle input with 24 volt control circuits
and conforms to the National Electrical Code. Thermal overload protection in reversing
starter. Momentary push button controls for "Forward-Reverse" are contained in a pendant
station with 25 ft. of rubber covered cable.
