MANUFACTURER: NICOLAS CORREA | MODEL: FP4050 | Age: 1998 | Ref # (item #): 36888
  • DETAILS
  • RELATED MACHINES
  • VIDEO
  • WARRANTY
  • FILES

1 USED Refurbished Nicolas Correa FP 40/50 5 AXIS CNC Bridge Mill New 1998 With New HEIDENHAIN iTNC 530 Control


FEATURES: 
NEW HEIDENHAIN iTNC 530 5-Axis CNC Controls 
Nicolas Correa C5E 2-Axis Continuous Milling Head 
60-Position Automatic Tool Changer 

CAPACITY: 
X-Axis Travel ......................... 196.85" 
Y-Axis Travel ......................... 127.95" 
Z-Axis (Ram) Travel ................... 39.37" 
Distance Between Columns .............. 98.42" 
Table Size ............................ 196.85" x 78.74" 
Max. Load on Table .................... 55,000 Lbs. 
Max Distance, Table to Surface ........ 37.40" 
B-Axis Spindle Tilt ................... 90/-100 Degrees 
C-Axis Spindle Rotation ............... /- 360 Degrees 
Spindle Speed (2-Axis Head) ........... 40 - 4000 RPM 
Spindle Motor ......................... 29.5 HP 
Spindle Taper ......................... BT #50 
Rapid Traverse, X-Y,Axis ...............283.46 IPM 
Rapid Traverse, Z Axes .................472.4 IPM 
Feedrates ..............................07 - 196.8 IPM 
Approx. Machine Weight ................ 123,000 Lbs. 

EQUIPPED WITH: 
NEW HEIDENHAIN iTNC 530
Nicolas Correa Model C5E 2-Axis Continuous Milling Head (49 HP) 
60-Position Automatic Tool Changer
(6) Months parts warranty

Scope of Refurb Work Performed:
Replacement of X,Y & Z axes Bearings
Preload of the X,Y & Z Ball Screws
Framework-Saddle: Adjustment of ram in framework (Turcite). Adjustment of axis guides (Turcite) (Y axis bridge / Z axis Bed).
Table: Grinding of table surface.
Sanding and painting every part of machine.
Repair / Replacement of damaged parts of the guards and telescopic covers.
Installation of new wipers.
Inspection for checking the correct functioning of all electric elements including:
A. Disassembling revision and cleaning of the whole power cabinet drives and CNC
B. Disassembling, cleaning of the spindle motor
C. Disassembling of control panel (Including cleaning, sanding and painting.
D. Reassembling of all inspected elemenets
E. Spindle Positioning
F. NEW HEIDENHAIN iTNC 530 Control.
Milling Head inspection (this included replacement of Bearings from principal shaft and grinding of this principal shaft.
Geometry setup and performance check all three axes after inspection.
Acceptance Test Protocols of geometry and accuracy established by Nicolas Correa.
Disassemble the C5E 2 axis Contouring Head, Inspect and replace spindle bearings.

With Optional 31i M Fanuc Controller  $836,200.00 USD









Phone: 818-465-6700 * Email: info@machinerynetwork.com

Proud Member of: